About

Owner‑run.
On site.Accountable.

Adrenaline Eco Blasting is an owner-run mobile blasting operation based in Medicine Hat, working across southeast Alberta. Matt Westland owns and runs it, and is on the work — so the person who quotes your job is answerable for how it turns out.

The Adrenaline Eco Blasting mobile blasting rig set up on siteMobile rig · Southeast Alberta

Why eco

Traditional sandblasting throws crystalline silica into the air. It is a classified human carcinogen, and once it is airborne it does not care whether it is you, your crew, your livestock or the neighbour's garden downwind.

We run recycled crushed glass instead — silica-free, and with water in the stream it knocks airborne dust down by up to 95%. That is not just a health line. It means we can work beside a running operation, inside a yard, or up against a house without shutting anything down or sheeting off half the property.

Wet, dry, or both in the same afternoon

Dry blasting is faster and it is the right call on concrete, structural steel and heavy equipment where a bit of dust is nobody's problem. But run it on a thin fender or a vintage panel and friction heat will warp the metal before you have finished the door.

Wet blasting cuts and cools at the same time. Rust and coatings come off, the panel stays flat. We switch between the two in minutes, which is why one trailer covers a stock trailer in a field on Tuesday and a 1970s truck cab on Thursday.

The honest partBlasting is not always the answer. Soft heritage brick, some old-growth timber and certain composites are better left to gentler methods, and we will say so rather than take the job and wreck something that cannot be put back.

What we will not do

  • Blast heritage masonry at a pressure that eats the fired face off the brick.
  • Put aggressive media on soft timber and leave it corrugated and fuzzy.

Scale of work

Jobs run from a single set of wheels or a deck through to multi-day industrial preparation and whole log homes. The rig is fully mobile and self-contained — compressor, pot, media and water all travel — so the constraint is access rather than location.

Where a project needs additional hands, staging, or a coatings partner to take it from bare metal through to a finished system, that gets arranged as part of the job rather than left to you to coordinate. If something is genuinely outside what we should be taking on, you will hear that too.

Rush work

Breakdowns do not schedule themselves. Neither do coating windows, shutdowns, or a tag that went up on your building overnight. Rush service is available depending on what is already on the books — say so when you call and we will let you know what is possible.

Rush service available

Talk to Matt directly.

Call, or text a photo of the job. You will get a straight answer on what it takes and what it costs.

Call 403-702-4435 Text a Photo Request a Quote

Fastest way to a number: text a photo of what needs blasting to 403-702-4435.

Call Now Text a Photo